波海菱鎂60輕燒鎂球 Bohai Magnesium 60 Light Burned Magnesium Ball
發布日期：2016-04-03 00:00 來源：http://www.usygg.com 點擊：
本公司供應輕燒鎂球，型號60。參數為：型號/規格* 60，產品等級* 其它，類別* 其它。質量保證，歡迎咨詢洽談。
Our company supplies light burned magnesium balls, model 60. The parameters are: model / specification * 60, product level * other, category * other. Quality assurance, welcome to consult the discussion.
Lightly Burned Magnesium Ball under New Process
Light-burned magnesium balls are made from ordinary light-burned magnesium powder, which are pressed after mixing. Light-burned magnesium balls are mainly used in converter steelmaking and slag splashing to protect the furnace, which can increase the converter age. The light-burned magnesium ball is prepared by adding 80% light-burned magnesium powder to 20% water, putting it into a mixer, rolling, stirring, and mixing for 15 to 20 minutes to form a mixture. The product is prepared by a ball conveyor and a ball conveyor. And then stack them. The light-burned magnesium spheres are ready for sale after 48 hours of over-drying and strength.
Light-burned magnesium balls are used as slagging component regulators for converter slag splashing protection furnaces. Because the slag splashing furnace requires proper slag viscosity and fire resistance, reasonable slag composition is the key to the slag splashing furnace. General slag can not be directly splash-protected. It is necessary to add a certain amount of magnesia balls for adjustment, and instead of using dolomite, reduce the amount of slag and increase the content of MgO in the slag.
Because magnesium oxide is a high-melting point mineral with a melting point of 2800 ° C, the increase in the content of magnesium oxide in the slag makes the slag viscosity greater and the fire resistance improved. The slag is more easily combined with the lining, and an effective slag protective layer is formed on the lining, thereby Improve furnace lining life and reduce consumption.
After adopting this technology, a steel company in the United States now has a furnace age of nearly 20,000 furnaces and a converter operating rate of 97%. West Germany, South Korea, Japan, Taiwan, etc. are promoting this process. Many iron and steel enterprises are also actively developing their own slag splashing furnace protection technology, including TISCO, Chenggang, Heavy Steel, and Maanshan Iron and Steel. Since the slag splashing furnace protection technology has been adopted, the maximum furnace age has been 1,500 and 500 furnaces respectively. , 700 furnace, 1100 furnace to 12000 furnace, 1500 furnace, 8500 furnace, 10200 furnace, have achieved great economic benefits.
However, the quality of lightly burned magnesium balls on the market is uneven. From the selection of raw materials of lightly burned magnesium balls, to the production and processing of products, to transportation and sales, the pace of progress of various companies is inconsistent, leading to the failure of customers and enterprises to obtain the maximum benefits Into. Some unreformed products from the old production line of light-burned magnesium balls have low ball-forming rates. After the raw materials are processed by the ball press, half are the product and half are the powder. The powder needs to be manually returned to the ball press to continue processing; the spheres are loose. Low density, low strength and easy to break. Especially when loading, unloading, transporting, squeezing and dropping, the sphere is prone to breakage. The shape of the sphere is incomplete. Some are half balls, some are one-third balls, and some are missing corners, with different shapes, matte surfaces, and poor appearance; users are not satisfied. The products sold contain 20% -35% small blocks and powders, etc., users have repeatedly objected to this; the most important thing is that it will increase customer costs and seriously damage the life of the converter lining body Due to the looseness, light density and low strength of the light-burned magnesium spheres, the spheres are easily broken during loading, unloading, transportation, squeezing and falling. Therefore, when the lightly burned magnesium balls are sent to the steelmaking furnace and have not come into contact with the molten steel, some broken pieces and powder particles are sucked out of the furnace by the strong negative pressure of the exhaust system on the top of the converter, and pass through the The electrostatic precipitator is collected and treated separately as waste, which results in the following 3 results: increasing the degree of damage to the converter lining, increasing the degree of damage to the exhaust system equipment, and increasing the consumption of light-burned magnesium balls per ton of steel.
Located in the “China Magnesium Capital”, Yingkou Bohai Magnesium Co., Ltd., manufactures light-burned magnesium balls (Huayi refractory brand products), strictly selects high-quality raw materials from the source, and carefully instructs engineers to strictly formulate according to customer needs and strictly to workers Under the operation, it is pressed through a series of processes (weighing, adding water and stirring, conveying to the compactor, and then to the ball press, and the ball is naturally dry). Huayi has always insisted on relying on scientific and technological innovation to produce first-class products and continuous improvement.
At present, the light-burned magnesium balls produced by Bohai after process improvement have reached the high-end level in the industry. Compared with light-burned magnesium balls produced by companies without process improvement, after years of operation and production, practice has shown that: The equipment level of mechanization and automation of the light-burned magnesium ball production line has been improved, the production environment has been improved, labor intensity has been reduced, and labor productivity has been increased. At the same time, the problems existing before the transformation have also been significantly improved, and the surface quality of the products has been significantly improved. The spheroidization rate of magnesium spheres has been increased from 50% before transformation to 85% to 90% after transformation; the density of magnesium spheres has also been improved; the drum index of the strength of the magnesium sphere structure has been increased from 30% to 45% before transformation After the transformation, 64% to 68% have exceeded the standard drum index by 58%. Especially when loading, unloading, transporting, squeezing, and dropping, the spheres did not break obviously. At the same time, the users did not raise any objections due to the surface quality of the lightly burned magnesium balls.
It can be seen that light-burned magnesium ball products not only need to have strict internal quality, but also need to pay attention to the appearance quality of the product, but also pay attention to the strength requirements of the product. Only enough product strength can have perfect appearance quality.
Bohai Magnesite continuously improves its own processes, improves product quality, reduces production costs, and makes continuous efforts to maximize the benefits of customers and enterprises. The company also develops products based on the needs of steel plants. Light-burned magnesia balls and magnesia-carbon balls use the oxygen-carbon reaction principle to reduce the content of iron oxide in the slag and the saturation solubility of magnesium oxide, so that both the refractory and the The viscosity satisfies the conditions of protecting the furnace. Therefore, the carbon is increased in the light-burned magnesia balls, that is, the magnesium-carbon balls. The company can process a variety of products suitable for its own steel plant according to the different needs of each steel plant, to serve our customers and achieve a win-win situation. Carrying Bohai is always a friend. Welcome to Bohai Magnesite Co., Ltd.
- 轉變經濟發展 加強企業創新 輕燒鎂球資源高效合理利用
- 輕燒鎂球行業的明天 The future of light burned magnesium ball industry
- 輕燒鎂球如何在濺渣中護爐 How lightly burned magnesium balls protect the furnace in slag splashing
- 轉變經濟發展 加強企業創新 輕燒鎂球資源高效合理利用 Transforming economic development, strengthening corporate innovation, efficient and rational use of light-burned magnesium balls
- 輕燒鎂球如何在濺渣中護爐 How lightly burned magnesium balls protect the furnace in slag splashing
- 煉鋼廢棄料制輕燒鎂球工藝 Process for making light-burned magnesium balls from steelmaking waste
- 購買輕燒鎂球后，要采取保護措施 Protective measures should be taken after purchasing lightly burned magnesium balls
- 輕燒鎂球含有什么成分 What is the content of lightly burned magnesium balls
- 輕燒鎂球燒結降鎂，效益更美 Light-burned magnesium balls sinter magnesium reduction, more beautiful